d a t a sh eet supersedes data of september 2004 2008 sep 01 ferroxcube pts30/19/i pt, pts, pts/i cores and accessories
2008 sep 01 1074 ferroxcube pt, pts, pts/i cores and accessories pts30/19/i core sets effective core parameters symbol parameter value unit (i/a) core factor (c1) 0.412 mm ? 1 v e effective volume 5940 mm 3 i e effective length 49.5 mm a e effective area 120 mm 2 a min minimum area 111 mm 2 m mass of set 31 g fig.1 pts30/19/i core set. dimensions in mm. 17.8 min 20.3 0.25 13.2 0.2 mfp058 18.8 0.2 13.3 0.2 25.4 0.4 30 0.5 core sets for general purpose transformers and power applications clamping force for a l measurements, 60 20 n. properties of core sets under power conditions bobbins and accessories for coil formers, winding data and mounting parts, see data sheet, ?p30/19? . grade a l (nh) e air gap ( m) type number 3c92 3830 25 % 1260 0 pts30/19/i-3c92 3c94 5400 25 % 1770 0 pts30/19/i-3c94 3c96 4840 25 % 1590 0 pts30/19/i-3c96 grade b (mt) at core loss (w) at h = 250 a/m; f = 25 khz; t=100 c f = 100 khz; = 100 mt; t = 100 c f = 100 khz; = 200 mt; t = 100 c f = 500 khz; =50mt; t=100 c 3c92 320 0.53 3.5 ? 3c94 320 0.53 3.5 ? 3c96 315 0.4 2.7 2.2 b ? b ? b ?
2008 sep 01 1075 ferroxcube pt, pts, pts/i cores and accessories pts30/19/i data sheet status definitions disclaimer life support applications ? these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify ferroxcube for any damages resulting from such application. product status definitions data sheet status product status definitions preliminary specification development this data sheet contains prelimin ary data. ferroxcube reserves the right to make changes at any time without not ice in order to improve design and supply the best possible product. product specification production this data sheet contains final specifications. ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. status indication definition prototype these are products that have been made as development samples for the purposes of technical evaluation only. the data for these types is provisional and is subject to change. design-in these products are recommended for new designs. preferred these products are recommended for use in current designs and are available via our sales channels. support these products are not recommended for new designs and may not be available through all of our sales channels. customers are advised to check for availability.
|
